Audio Looper
Repeat a track or section to length.
That file did not work
Free to start.
4.9 of 5 from 336 reviews
No audio handy? Try a sample
Sample song0:30
Kept9.5 s
Try it yourself
EchoWave's audio looper repeats any track or trimmed section as many times as you need, right in your browser. Upload an MP3, WAV or M4A, set your loop points on a visual waveform, and duplicate until you hit your target length. Beat detection snaps cuts to the downbeat and short fades smooth the join, so the repeat is hard to hear. Drop the loop under a video, or export it free as an HD MP4 with a small watermark badge; audio-only files come with paid plans.
Teams that use EchoWave
An audio looper inside a full editor
Most loop tools repeat a file a few times and hand it back. EchoWave puts the loop on a multi-track timeline, so you can trim to the exact bars you want, snap cuts to a beat grid, fade the join, and stack other sounds on top. Need the same treatment for footage? Use the video looper. For deeper cleanup, open the full audio editor.
A trimmed section repeating on the timeline, with cuts snapped to the beat grid.
- 0.1x-16xspeed range per clip
- 218royalty-free music tracks
- 63AI voice over voices
- 4Kmax export resolution on Pro
How to loop audio online
Four steps from a single file to a finished loop.
-
1. Upload your audio
Drag an MP3, WAV or M4A into the editor, or capture something on the spot with the built-in voice recorder. The waveform appears on the timeline so you can see the structure of the track at a glance.
-
2. Trim to the section you want
Drag the clip edges to isolate the part worth repeating. Turn on beat snapping so both cuts land on a downbeat, which keeps the repeat in time with itself.
-
3. Repeat it
Copy and paste the clip along the timeline until you reach your count or target duration. Add a short fade at each join, then hit play and listen through a few repeats to check the seam.
-
4. Export and download
Export an HD MP4 free, with a small removable watermark badge and a short branded end card. Audio-only MP3, M4A, WAV and FLAC downloads come with paid plans, which also remove the badge. When the render finishes, your file is ready to download.
Loop tools that go past simple repeat
Everything you need to build a loop that holds up on the tenth listen, then put it to work.
-
An audio looper with precise repeats
Duplicate a clip twice or two hundred times and watch the total duration update as you go. Copy and paste along the timeline until you hit a set count or a target length, like one hour of focus music. Nothing is re-encoded until you export, so every repeat stays exact.
-
Trim before you loop
Loop the best eight bars instead of the whole song. Drag the clip edges on the waveform to isolate a section, or use the audio trimmer workflow to cut with frame-level precision. A tight source clip is the difference between a loop that flows and one that drags.
-
Beat detection with snap-to-beat
EchoWave scans your track and lays a beat grid across the timeline. Cuts snap to the nearest beat, so your loop starts and ends on a downbeat and the repeats stay in time. This is the single biggest fix for loops that feel like they stumble at the join.
-
Fade the seam
A click at the join usually means the cut landed on a loud peak. Add a short fade out at the end of each repeat and a matching fade in at the start, and the join disappears. Preview playback in the editor to check the seam before you commit.
-
Loop audio under a video
Drop the looped bed on a track beneath your footage for a study stream, an ambient scene or a product demo. Add a music visualizer on top if the sound needs a face. Picture and audio live on the same timeline, so nothing drifts.
-
Join and layer tracks
Chain different files end to end with the audio merger, or stack rain under a piano loop on separate tracks. A categorized sound effects panel is built in for extra texture.
-
Change speed or reverse the loop
Slow a practice loop to 0.25x, push an ambient bed to 4x for a texture experiment, or reverse a clip entirely. Speed applies per clip, so one repeat can behave differently from the next.
-
Export audio, or a finished video
Export an HD MP4 free with a small removable EchoWave watermark badge, or go audio-only with a paid plan: MP3 and M4A from Creator, WAV and FLAC from Pro. A one-hour loop is fine; longer files simply take longer to render.
What people loop
-
Study and focus sessions
Turn a 3 minute lofi track into an hour of background sound with no jarring restarts. Fade each join and the repeat sinks into the background where it belongs.
-
Meditation and sleep beds
Loop rain, chants or a slow pad to the exact length of a session. Long, gentle fades at each join keep the bed unbroken from start to finish.
-
Game dev ambience
Build looping tavern noise, engine hum or dungeon drones for your game. Cutting at a quiet point and fading the seam keeps the loop from clicking on every cycle.
-
Background music for videos
Your track runs 40 seconds and the video runs 4 minutes. Loop the music under the footage and lower its volume beneath a voice over, recorded with your own mic or one of 63 AI voices.
-
Practice and transcription
Isolate a solo, loop it, and slow playback to as little as 0.25x without leaving the browser. Bring the speed back up as the passage gets under your fingers.
-
Intros and stream scenes
Loop a short sting or ambient bed behind a starting-soon screen or podcast intro. Export it once at the length you need and reuse the same file across every episode or stream.
How EchoWave compares
| Feature | EchoWave | VEED | Kapwing | Audacity |
|---|---|---|---|---|
| Runs in the browser, nothing to install | Yes | Yes | Yes | No |
| Loop a trimmed section of a track | Yes | Yes | Yes | Yes |
| Beat detection with snap-to-beat | Yes | No | No | No |
| Multi-track timeline for layering | Yes | Yes | Yes | Yes |
| Loop audio under video footage | Yes | Yes | Yes | No |
| Music visualizers | Yes | Yes | Yes | No |
| AI voice over | yes (63 voices) | Yes | Yes | No |
| DAW-style effects (EQ, compression, reverb) | No | No | No | Yes |
| Stock music library | Yes | Yes | Yes | No |
| Works offline | No | No | No | Yes |
| Free downloads | yes (720p MP4, watermark badge; audio-only needs a paid plan) | yes (limits) | yes (limits) | Yes |
| 4K video export | yes (Pro) | yes (paid) | yes (paid) | No |
Based on each tool's public pages as of July 2026. Features and pricing change, so check current plans before you commit.
Loop it once, use it everywhere
EchoWave is free to use in any modern browser on Mac, Windows, Linux and Chromebooks, and the free plan exports your loop as an HD MP4 with a small removable watermark badge. Paid plans remove the badge and add audio-only downloads, from MP3 on Creator to WAV and 4K video on Pro.
Audio Looper FAQ
How do I loop an audio file online?
Upload the file to EchoWave, trim it to the section you want, then copy and paste the clip along the timeline until it reaches your target length. Preview it, then export as MP3 or M4A on Creator, or WAV or FLAC on Pro. Everything works in your browser, so there is nothing to install.
How do I make an audio loop without clicks or pops?
Clicks happen when the cut lands on a loud peak in the waveform. Cut at a quiet point, ideally on a downbeat using EchoWave's beat snapping, then add a short fade out and fade in at the join, roughly 10 to 50 milliseconds for rhythmic music and longer for ambient beds. Listen through several repeats before exporting.
Can I loop just one part of a song?
Yes. Drag the clip edges on the timeline to isolate the section, then repeat only that clip. Looping the best eight bars usually sounds better than repeating a full track whose intro and outro break the flow. Pick a stretch where the energy at the start matches the energy at the end, so each pass hands off cleanly to the next.
How do I make a song loop for 1 hour?
Divide 60 minutes by the length of your clip to get the repeat count, then paste that many copies on the timeline. A 3 minute track needs 20 copies, a 90 second clip needs 40. An hour-long file is fine, and the preview stays responsive while you build it.
Is EchoWave's audio looper free?
Yes. You can upload, trim, loop, preview and export on the free plan, which renders an HD MP4 with a small removable EchoWave watermark badge and a short branded end card. Paid plans remove the badge and add audio-only downloads in MP3, M4A, WAV and FLAC, plus higher video quality, 1080p from Creator and up to 4K on Pro.
What formats can I export a loop in?
MP4 video export is on every plan, including free, where it carries a small watermark badge. Audio-only formats need a paid plan: MP3 and M4A from Creator, WAV and FLAC from Pro. Video formats grow the same way, with WebM on Creator and MOV and GIF on Pro, and bitrate and codec controls are there if you need them.
Can I put looped audio under a video?
Yes, and this is where EchoWave beats single-purpose loopers. Loop the music on one track, place your footage above it, and trim the audio to the video's length. If the picture itself needs to repeat, EchoWave has a video looper for that.
Can I record something and loop it right away?
Yes. The built-in recorder studio captures your voice, screen or webcam, and the recording lands straight on the timeline. Trim it, duplicate it, and export, which works well for guided meditation phrases or practice drones.
Does looping reduce audio quality?
No. Duplicating a clip on the timeline is lossless because every copy references the same source file. Quality is decided once, at export, where you choose the format and bitrate. Pick WAV or FLAC on Pro if you want no loss at all.
How creators use EchoWave in real projects
Loading the reviews
Ready to loop
your next track?
Export an HD MP4 free with a small watermark badge; paid plans remove it and add MP3, WAV and video up to 4K.